Hybrid Polymer Roofing System (Dark Grey)

Applications:

Protection, repair, restoration and waterproofing of the following surfaces and areas.

• Concrete floor slabs and roofs
• Balconies and terraces
• Small horizontal movement joints
• As a flexible coating of roofs
• Protection of Polyurethane foam insulation
• Waterproofing of wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc.

Product Features:

• Can be applied to damp surfaces
• Good resistance to UV, water and moisture
• Self-levelling
• Solvent-free, non-flammable
• Apply by roller, brush or spatula
• Breathable until cured, allowing moisture to evaporate
• Environmentally friendly – free from bitumen
• Isocyanate and solvents

Storage & shelf life:

• Protected from water, frost and adviser air conditions
• Keep dry and cool on wooden pallets between +10 degrees Celsius and 25 degrees Celsius
• The opened products should be consumed immediately
• Shelf life is maximum 9 months conditional to complying with the aforementioned storage conditions.

Typical Specifications:

• Colour: Grey
• Curing rate: 3.05 m/day
• Application temperature:  5 degrees Celsius to 35 degrees Celsius.
• Product temperature: 5 degrees Celsius to 25 degrees Celsius
• Temperature resistance (Cured product) minus 20 degrees to 80 degrees Celsius.
• Density: 1.44 (ASTM D1875)
• % Elongation Min: 300% (Din 53504)

Surface preparation:

The surface needs to be clean and sound, free of any contaminations, which may harmfully affect the adhesion of the coating. Any loose pieces and grinding dust need to be thoroughly removed. Avoid standing water.

Application:

Apply the product evenly in one or two layers, manually with a roller or brush. The second layer is applied after complete dying of the first layer. It is highly recommended to apply the second layer, the day after. Furthermore, it can be applied with a flat trowel for horizontal surfaces. In particular, crack-prone or other problem areas, like wall floor connections, 90 degree angles, chimneys, pipes and waterspouts (siphon). The application of the matting, soaked and saturated in the first wet layer, is recommended. Consolidate the matting firmly with a roller. The second layer is applied over matting, after the first layer has completely cured. In order to increase the adhesion of the title adhesive of the title adhesion, use of the quartz b spreading is highly recommended.